News

04 series and cobra x 5g support X band. 04 series include sky04x pro, sky04o pro. If your goggle is 5.8g, you could buy 5g steadyview to get X band....

Understanding the differences between SKYZONE fpv goggles is the best way to choose one that’s right for you. Skyzone fpv goggles(click to see more details)

The COBRA SD is the Diversity receiver version of COBRA S, the diversity receiver didnt support the firmware update, thats why there is no type c port on the receiver

---the 5G mark means your receiver support X band, but you may need use X band antenna to get best performance when you use X band

yes, but we would sugges you usd dc, the powerband didnt have low voltage alrarm, also since is only 5V, the current draw is really high, will cause the ggoggles...

It’s different hardware, the 5G version support X band, also work with 5.8G, but sensitivity may less 1 or 2 db, but the stock 5.8G didnt support 5G(X Band) 5g...

This is a complete tear down of the Skyzone Cobra X V2 goggles. This video will be a good guide if you were to replace the power and DVR boards...

--The official website currently sells V2, but in fact the label on the product is V4. They are the same product. Here is a detailed explanation.V1 is original,V2 is support...

The steadyview(hardware equal or greater than 3.2) have 3 MIX mode and 1 DIV mode.MIX1: Mix1 mode provides basic fusion processing to reduce excessive intervention of the circuit on the...

1. To use the Steadyview+ELRS, goggles must be flashed to the lateset firmware. check how to flash the goggles firmware.2. The goggles must on steadyview X mode to work with...

1. To use the Steadyview+ELRS, goggles must be flashed to the lateset firmware. check how to flash the goggles firmware. also you must use ELRS system and TX backpack.2. The...

For SteadyView/RapidMix 1There is a tiny boot button on the top board. hold the boot button. Connect receriver to the computer via the USB-C port (windows only)2.A new removable drive...

the goggles have 3 different hardware due to global chip shortage, before flashing the firmware, user must check their hardware version of the goggles in the system menu.V1 orignailV2 60FPS...

I just received my swordfish RTH version and wondering IF there is a TBS Crossfire receiver built into this flight controller or do i have to add one.--the RTH version...

whether the steadyview X module can work in the quadiveristy system? --sure the stvx can work as qudversity mode on ev300o, you need flash the latest firmware of ev300o, make sure...

--The SKYZONE SKY04O PRO is upgrade version of SKY04O, with 1280*720 OLED panel and new 42 degree optics, user can get better and more immersive FPV experience than SKY04O, with...

Can I just remove the sky04o fan to put a second steadyview receiver? ---better not, the fan at the module bay is to dispatch the head from the new OLED...